Black is black. The rims and hubcaps aren't the only ones who want to shine. The tires alone provide the link between the road and the vehicle. Your tires deserve a little cleaning, don't you think?
If you just got your driver's license and still don't know how to change your car's tire? Enter and check out the 8 simple steps to change tires!
What you'll find in this post:
Change flat tires in 6 steps
Step by step to change flat tire
If you just got your driver's license and still don't know how to change your flat tire , be sure to read this article.
In this post, find out how to change your tire in just 6simple steps.
1st step: Steppe
Locate the spare tire , jack and wheel wrench inside your car. They usually stay in the trunk, under the rug.
In some car models the spare tire may be under the vehicle or outside the rear. In them, the jack and wheel wrench will be inside the trunk.
2nd step: Loosen the screw
Fit the wheel wrench to the wheel nut with a flat tire, and force the foot counterclockwise to loosen the screw .
Repeat the process with the 4 screws.
3rd step: Place the monkey
Take the jack and fit the wheel wrench on it (see the image below), as it will serve as a lever.
Place the jack on the bottom edge of the car (as highlighted in the photo) and turn the wheel wrench counterclockwise to lift the car .
4th step: Remove the wheel
With the jack suspended and wheel off the ground, it's time to remove the wheel from the car .
First, place the spare tire under the car so that it serves as a pair of pants (in case the monkey disarms).
Use the wheel wrench (now with your hand) to finish unscrewing the screws and remove the wheel.
5th step: Insert the new tire
Now, it is the wheel with the flat tire that will put the car on. Remove the spare wheel under the car and fit it to the car .
Place the 4 screws by hand and tighten only a little with the wheel wrench to secure the wheel to the car.
6th step: Remove the monkey
Remove the wheel that was serving as a chock. Use the wheel wrench to lower the jack . This time, rotate counterclockwise.
To tighten the screws, use the wheel wrench, tightening it with your foot counterclockwise so that the 4 screws are firm.
Keep the wheel with the flat tire in place of the spare tire, wash your hands and keep going!
Attention: Take the spare tire to the tire repairer as soon as possible, so as not to get a fine or tighten it, okay? Kindly visit this link for useful reference: how to remove a tire from a rim
To change the flat tire, follow the step-by-step:
1. Locate the spare tire, jack and wheel wrench in the trunk of your car.
2. Using the wheel wrench and foot, loosen the wheel bolts.
3. Place the jack under the car and lift the car(use the wheel wrench as a lever, turning counterclockwise).
4. Just unscrew the 4 screws and remove the flat tire.
5. Place the spare tire in the car and slightly tighten the 4 screws.
6. Use the wheel wrench to lower the jack (turning counterclockwise).
7. Tighten the 4 screws securely using the foot on the wheel wrench.
Save the spare tire and go on your journey!
Do not forget to repair the tire as soon as possible, so as not to get fined or tighten.
Cleaning a tire may surprise
And yet. When you clean your tires, you don't just remove tar residue. You extend their lifespan. Admittedly, it is an occasional cleaning but it is necessary, especially when your tires must be stored for a long period (during a change of summer / winter tires for example).
The most common method is to wash your tires with soapy water. Brush them and then rinse them with clean water. Simple, fast, inexpensive.
It is also possible to clean them with a high pressure cleaner. Do not use round nozzles but use flat nozzles to avoid damaging the gum of your tires and keep a minimum distance of 20 centimeters.
You can also clean them with special products. Some only clean while others protect the gum from UV rays, increase resistance to water and other substances present on the bitumen and reduce the attraction of dust.
The Taiwanese method
This technique, to say the least, is to hang rubber straps on the bumpers that will beat the tires when your car is driving. This method will keep your tires clean and black. It remains to be seen whether you will appreciate the new and unusual look of your car.
What not to do with your tires
It may seem obvious but it is better to remember. A tire is never cleaned with oil, grease or solvents. These damage the rubber and accelerate the degradation of the tire.
Shine car tires
The accessories you need To make your tires shine, you need a microfiber and a best tire shine. This product is mainly used in dealerships and in automotive professionals. As this product is quite specific, you will find it in some dealer stores and some manufacturers. You can also make it yourself.
Steps to follow. The product can have a longer useful life on clean tires. So before applying the product, you can start by tire cleaning. You can simply use soap and water for this. You can then apply the product to make your tires shine. To do this, take the product and apply it to the tires using a sponge.
Tips and advice It is advisable to apply the product to the sidewall of the tire. You can apply it in a few layers. Try to apply the product all around the sidewall of the tire. In this way, you can avoid having shine contrasts on the tires. Now you know the tips and steps to follow to make your tires shine. It's your turn !